How to read the prices
The table shows the base values for the main services. If the request includes specifics, they are clarified in advance.
Prices
Current prices for the main services.
Here you can find the prices for the most frequently requested services. If a request is more specific, the details are clarified according to the actual work.
Core services
Main services and prices.
| Service | Unit | Price | Note |
|---|---|---|---|
| Cutting | pc. | 18.00 EUR | Board up to 2800 x 2100 / 2070, up to 25 parts |
| Cutting | pc. | 20.00 EUR | Board up to 3660 x 1830 x 18 or thicker, up to 25 parts |
| Cutting of thin boards and worktops | pc. | 8.50 EUR | Up to 15 parts |
| Single cut | pc. | 0.60 EUR | For detail corrections |
| Lamination of parts up to 0.8 m2 | pc. | 2.50 EUR | Per part |
| Lamination of parts over 0.8 m2 | pc. | 5.00 EUR | Per part |
| Edge banding 22 x 0.5 - 1 mm | lm | 0.87 EUR | Per linear meter |
| Edge banding 22 x 1.3 - 2 mm | lm | 0.87 EUR | Per linear meter |
| Edge banding 28 x 0.5 - 1 mm | lm | 0.92 EUR | Per linear meter |
| Edge banding 28 x 1.3 - 2 mm | lm | 0.92 EUR | Per linear meter |
| Edge banding 42 x 2 mm | lm | 1.84 EUR | Per linear meter |
| Block cutting up to 4 parts | pc. | 3.50 EUR | Per part |
| Block cutting above 4 parts | pc. | 7.00 EUR | Per part |
| Rebate on parts up to 1 meter | pc. | 1.12 EUR | Per part |
| Rebate on parts above 1 meter | pc. | 2.15 EUR | Per part |
| Hinge holes | pc. | 1.00 EUR | Per piece |
| Miter cut on parts up to 1 meter | pc. | 1.12 EUR | Per part |
| Miter cut on parts above 1 meter | pc. | 2.15 EUR | Per part |
| Groove on parts up to 1 meter | pc. | 1.12 EUR | Per part |
| Groove on parts above 1 meter | pc. | 2.15 EUR | Per part |
| Each next part above the allowed number in a board | pc. | 0.60 EUR | Per piece |
| Angled cutting | pc. | 3.00 EUR | Per piece |
| Drilling holes for fittings | pc. | 2.56 EUR | Per part |
| Delivery in Sofia and Pernik | trip | 30.00 EUR | Up to 16 cut boards, up to two pallets in one trip |
Prices are shown only in euro.
For more specific requests
If the order includes additional processing or specific requirements related to the material or the parts, the best next step is a quick phone call.
Details
Important points to keep in mind.
- If an edge-banded side of a part is shorter than 100 mm, 1 linear meter is charged.
- The minimum length that can be edge banded is 80 mm.
- For more specific cases, call us first so we can clarify how the particular job will be priced.